3-54 BA 348-01 * 2.0 * 34801b330.fm
3 Operation
Switching the load stabilizer ON and OFF
Switch 69 is located on the side console on the right.
Switch on the load stabilizer only in transport position of the loader unit!
The loader unit yields easily with the load stabilizer switched on, making it
difficult to perform any precise lifting movements.
• The lift capacity of the loader unit is only about 60 % of the rated force!
• Switch off the load stabilizer during pallet forks operation
Depending on the load, the loader unit can rise or go down slightly as you
switch on the load stabilizer!
Switching the load stabilizer on or off depends on the individual situation.
Fig. 70 : Switch for load stabilizer (option)
69 43
B
A
Function Work operation
OFF
☞Press switch 69 to position A
➥Load stabilizer out of operation
➥The hose burst valve (option) is
switched on
➥Indicator light 43 on the instrument
panel illuminates (if the machine is
equipped with a hose burst valve)
In general for heavy-duty work,
for example picking up excavated
material
ON
☞Press switch 69 to position B
➥Load stabilizer is switched on
➥The hose burst valve (option) is
switched off
➥Indicator light 43 on the instrument
panel goes out (if the machine is
equipped with a hose burst valve)
For machine travel on public
roads, for lighter work with the
loader unit and for light off-road
transport
To Next Page
Loading...
