5-18 BA 348-01 * 2.0 * 34801b510.fm
5 Maintenance
5.9 Lubrication work on the axles
Lubricate all lubrication points mentioned below with lithium-saponified brand-name grease
–seeFluids and lubricants on page 5-39
Lubricating the rear axle oscillation-type bearing
The machine has an oscillation-type rear axle. Grease the bearing at the latest after every
50 operating hours or once a week. Lubricate more frequently when in heavy-duty operation
(once a day)!
The grease nipple is located above the axle tube, on the left in travel direction.
☞Lubricate grease nipple A of the oscillation-type bearing
Lubricating the wheel motor bearings (front/rear axles)
☞Lubricate two grease nipples B (upper/lower bearings) every 50 operating hours or
once a week. Lubricate more frequently when in heavy-duty operation (once a day)
Fig. 179 : Oscillating axle bearing grease nipple
A
Fig. 180 : Wheel motor bearing grease nipples
B
To Next Page
Loading...
