BA 348-01 * 2.0 * 34801b330.fm 3-27
Operation 3
Enabling (locking) the drive interlock
☞Apply the parking brake
➥–seeParking brake on page 3-50
☞Stop the engine
☞Remove the ignition key (blue)
➥The drive interlock is enabled in 30 seconds
The drive interlock remains disabled if the ignition key (blue) is not removed
from the ignition lock!
Disabling (releasing) the drive interlock
Start and stop the engine exactly as described in “Starting the engine” on page 3-36.
☞The system is enabled 5 seconds after the ignition key is inserted in the ignition lock
☞Start the engine –seeStarting the engine on page 3-36
➥The drive interlock is disabled as long as the engine runs
Deleting coded keys
Deleting coded keys is necessary whenever a coded key is lost
Important! A coded key cannot be deleted unless the machine lights
(side marker lights) are switched on.
☞Switch on the machine lights – see chapter 3 “Machine lights (option)” on
page 3-57
• All coded keys are deleted during deletion
• After deletion has been performed, all existing keys can be recoded
• Deletion is performed by inserting the master key in the ignition lock and by turning it to
position 1 for a minimum 20 seconds
• All coded keys are then deleted, and all existing keys can be recoded
• The master key code is not deleted during deletion
To Next Page
Loading...
