BA 348-01 * 2.0 * 34801b110.fm 1-3
Introduction 1
1.2 Notice on machine safety
Handling the machine
• Knowledge of the safety instructions and regulations is a prerequisite for the safe
handling and correct operation of the machine
• All persons operating or working on this machine must observe this Operator’s Manual,
in particular the safety instructions
• The accident prevention rules and regulations that apply to the place of use of the
machine must be followed
• The machine has been designed and built in accordance with state-of-the-art standards
and the recognized safety regulations. Nevertheless, its use can carry a risk to life and
limb of the user or of third parties, or cause damage to the machine or to other material
property
• The machine may only be used according to its designated use and only in technically
perfect and safe condition.
• Your own safety, as well as the safety of others, depends to a great extent on how the
machine is moved and operated. Therefore careful and prudent working is the best way
to avoid accidents
• Have malfunctions affecting safety rectified immediately
Warranty and liability
The “Conditions of Sales and Delivery” of our sales partners apply as a rule.
In case of personal injury or damage to property, warranty and liability claims are excluded
if injury or damage is due to one or more of the following causes:
• Non-designated use of the machine
• Incorrect start, operation and maintenance (assembly work) of machine
• Operation of machine with safety and protective equipment that is malfunctioning,
incorrectly installed or not in working order
• Failure to observe instructions in the Operator’s Manual regarding putting into operation,
operation and set-up, maintenance, transport and shut-down or storage of the machine
• Modifications on the machine without proper authority, for example modifications
affecting the drive, output, engine speed
• Inadequate monitoring of machine parts crucial to safety and subject to wear
• Incorrect repair work
To Next Page
Loading...
