Kramer 350

BA 348-01 * 2.0 * 34801b511.fm 5-39
Maintenance 5
5.19 Fluids and lubricants
Component/application Fluid/lubricant
1
1. Bear in mind the safety data sheet of the engine/machine fluids
Specification
Season/
temperature
Capacities
2
2. The capacities indicated are approximate values; the oil level check alone is relevant for the correct oil level
Diesel engine
Engine oil
3
with oil filter
3. Specification: MIL-L-2104C; API CD/CE/CF4; CCMC-D4
10W-40; EO1040B
4
4. Abbreviation for lubricants (Hauptverband der Deutschen Bauindustrie e. V. – German construction engineering association)
Year-round
7.2 l
5W-30
5
5. Used in Scandinavian countries only
+/− 30 °C
Hydraulic system: hydraulic oil
reservoir, drive hydraulics,
wheel motors
Hydraulic oil
6
6. DIN 51 524 (ISO 6743/4)
HVLPD 46 (HYD0530
4
) Year-round
About 40 l
HVLPD 32
5
+/− 30 °C
Biodegradable oil
AVILUB Syntofluid 46
Year-round
PANOLIN HLP Synth 46
Grease nipples
loader unit/axles
Multipurpose grease
Lithium-saponified brand-name
grease MPG-A
4
Year-round As required
Battery terminals Acid-proof grease SP-B
4
Year-round As required
Aggressive media (option)
Anticorrosion
protection
Anticorit BW 366
7
7. Specification: TI 8030-015/K 19/MIL-C-16 173 C-Grade 4
Year-round As required
Installation
8
of pins, shafts
8. Notice! Pins (hard-chromium plated or coated with Molykote 3400A) are inserted in dry state. Lubricate via grease nipples once assembly is over
Special grease
Optimoly paste “TA”
9
White paste
9. 250 gr tube, order no.: 1000030311
Year-round As required
Fuel system, fuel tank
Diesel fuel
10, 11
10. In order to avoid engine damage, do not add additives to the diesel fuel!
11. If fuels that do not comply with DIN EN or ASTM (USA) are used, warranty rights shall not apply in case of diesel engine damage
DIN 51628/DIN EN 590 (EU)
ASTM D975-94 (USA)
Year-round
−40 °C
About 30 l
Biodiesel
10, 11
DIN EN 14214
Engine cooling Antifreeze
12, 13
12. Factory fill – antifreeze concentrate −60 °C
Complete refill, see Coolant compound table on page 6-10 and manufacturer indications on the packaging
13. The coolant must be replaced every 2 years by an authorized service centre
MS Frostschutz HAVOLINE XLC
Year-round
−31 °C
About 4.2 l
Washer system (option) Cleaning agent
14
14. See manufacturer’s indications on the packaging and bear in mind the antifreeze compound table
Water + antifreeze
Year-round
−20 °C
About 1.5 l
Maintenance