BA 348-01 * 2.0 * 34801b340.fm 3-109
Operation 3
Operation of additional control circuit
Additional control circuit 40 l/min (hydraulic pump 8 + 8 cm³/rev)
See the Operator’s Manual of the attachment for information on using the quick couplers
☞Install the attachment in the quickhitch and connect it with quick couplers B at the front
or with quick couplers C at the front or rear
☞Press switch 62 to position B
☞Standard – pull control lever 12 fully backward and lock it with lock sleeve A
(press detent downward – continuous operation)
☞Option – slide lock C on switch 66 downward and press the switch to position B
➥Front or rear 40 l/min additional control circuit in operation
Additional control circuit 60 l/min (hydraulic pump 16 + 8 cm
3
/rev)
☞Install the attachment in the quickhitch and connect it with quick couplers B at the front
or with quick couplers C at the rear or front
➥See the Operator’s Manual of the attachment for information on using the quick couplers
☞Press switch 62 to position A
☞Standard – pull control lever 12 fully backward and lock it with lock sleeve A
(press detent downward – continuous operation)
☞Option – slide lock C on switch 66 downward and press the switch to position B
➥Front 60 l/min or rear 40 l/min additional control circuit in operation
Additional function (for example rotating snow cutter ejector, etc.)
☞Press switch 55 on control lever 11 as required (up/down)
➥Additional function (rotation to left/right) in operation
Fig. 149 : Operation of quick couplers for additional control c
cuit (option)
A
12
E
C DB
55
B
A
62
66
B
A
Option
Standard
To Next Page
Loading...
