Kramer 350

BA 348-01 * 2.0 * 34801b110.fm 1-1
Introduction 1
1 Introduction
1.1 General information on the Operator’s Manual
This Operator’s Manual applies to the model 348-01 wheel loader
It is primarily designated for the machine operator and provides instructions on:
•use
• mode of operation
• safety instructions
• operation, set-up and maintenance of the machine.
Important. Carefully read and understand the Operator’s Manual before starting up,
servicing or repairing the machine.
Pay particular attention to the “Safety Instructions” given in chapter 2.
• The Operator’s Manual and any supplements must always be at hand at the place
of use of the machine, and must therefore be kept in the storage compartment or net
behind the operator seat.
• Immediately replace an incomplete or illegible Operator’s Manual by a new one.
• In addition to the Operator’s Manual, observe and instruct the operator in all other
generally applicable, legal and other mandatory regulations relevant to accident
prevention and environmental protection.
• Also observe the Operator’s Manuals of the attachments.
Kramer-Werke GmbH keep abreast of the latest technical developments and constantly
improve their products.
We may from time to time need to make changes to figures and descriptions in this
documentation which do not reflect products that have already been delivered and that will
not be implemented on these machines.
Technical data, dimensions and weights are only given as an indication. Responsibility for
errors or omissions not accepted.
Please contact your dealer if you require more information on the machine or the Operator’s
Manual.
Explanation of warning symbols
This symbol identifies safety warnings. It is used for warning against potential personal
risk or danger.
Therefore, pay particular attention to the safety information following this “Safety Instruction”
symbol.
This symbol identifies danger for the machine. It is used for avoiding potential danger
on the machine.
Introduction
Table of Contents
Index