BA 348-01 * 2.0 * 34801b330.fm 3-57
Operation 3
3.36 Machine lights (option)
Machine lights operation
The switch for the side marker lights, low and high beam switch is integrated in the turn
indicator lever (multifunctional lever) on the left of the steering column.
Only the side marker lights stay lit if the ignition is switched off
(with low beam switched on) – key in preheating start switch 9 in position 0!
Fig. 74 : Light system
26
42
59
II
I
Side marker lights
ON
☞Turn rotary switch 59 to the
1st notch
➥The side marker lights illuminate
OFF
☞Turn rotary switch 59 to the
0notch
➥The side marker lights go out
Low beam
ON
☞Turn rotary switch 59 to the
2nd notch
➥Low beam illuminates
OFF
☞Turn rotary switch 59 to the
0notch
➥Low beam goes out
High beam
ON
☞Turn rotary switch 59 to the
2nd notch
☞Press lever 26 upward to
position II
➥Indicator light 42 on the indicating
instrument illuminates
➥High beam illuminates
OFF
☞Press lever 26 downward to
position I
➥Indicator light 42 on the indicating
instrument goes out
➥Low beam illuminates
Headlight flasher
ON
☞Turn rotary switch 59 to the
2nd notch
☞Briefly pull lever 26 upward
(beyond position II)
➥Indicator light 42 on the indicating
instrument illuminates
➥High beam illuminates briefly
To Next Page
Loading...
