Kramer VS-42UHD

VS-42UHD - Protocol 3000 45
13.3.1.3 FACTORY
Functions Permission Transparency
Set:
FACTORY
End User Public
Get:
-
-
-
Description Syntax
Set:
Reset device to factory default
configuration
#FACTORYCR
Get: - -
Response
~nn@FACTORYSPOKCR LF
Parameters
Response Triggers
Notes
This command deletes all user data from the device. The deletion can take some time.
Your device may require powering off and powering on for the changes to take effect.
K-Config Example
“#FACTORY”,0x0D
13.3.1.4 HELP
Functions Permission Transparency
Set:
-
- -
Get:
HELP
End User
Public
Description Syntax
Set: - -
Get:
Get command list or help for specific
command
1. #HELPCR
2.
#HELPSP
COMMAND_NAME
CR
Response
1. Multi-line: ~nn@Device available protocol 3000 commands:CR LFcommand,SP
command...CR LF
2. Multi-line:
~nn@HELPSP
command
:CR LF
description
CR LFUSAGE:
usage
CR LF
Parameters
COMMAND_NAME – name of a specific command
Response Triggers
Notes
To get help for a specific command use:
HELPSPCOMMAND_NAMECR LF
K-Config Example
“#HELP”,0x0D