Kramer VS-42UHD - Page 59

54 VS-42UHD - Protocol 3000
13.3.1.17 SIGNAL
Functions Permission Transparency
Set: - - -
Get
SIGNAL?
End User
Public
Description Syntax
Set: - -
Get:
Get input signal lock status
#SIGNAL?SPinp_idCR
Response
~nn@SIGNALSP
inp_id,status
CR LF
Parameters
inp_id – input number: 1 (HDMI In 1), 2 (HDMI In 2), 3 (HDMI In 3), 4 (HDMI In 4)
status – lock status according to signal validation:
0
(Off),
1
(On)
Response Triggers
After execution, a response is sent to the com port from which the Get was received
A response is sent after every change in input signal status from On to Off or from Off to On
Notes
K-Config Example
Get the input signal lock status of HDMI In 2:
“#SIGNAL? 2”,0x0D