7 DISPLAY 30
401909-01
– Press both buttons for 3–5 seconds.
The Setup menu is displayed. The UNIT display flashes.
– Press one of the buttons to select UNIT for the speed in kilometers KM/H or miles
M/H.
401911-01
– Wait for 5 seconds.
The speedometer changes to the next menu item. The symbol flashes.
– Press one of the buttons to select the 24h or 12h display of the clock.
401912-01
– Wait for 5 seconds.
The speedometer changes to the next menu item. The symbol flashes.
Resetting the time
– Press the left button.
The value decreases.
Advancing the time
– Press the right button.
The value increases.
401913-01
– Wait for 5 seconds.
The speedometer changes to the next menu item. The symbol flashes.
– Set the service.
Guideline
One-time service after 1 h
Service every 20 h
Shortening the service interval
– Press the left button.
The value decreases.
Extending the service interval
– Press the right button.
The value increases.
401914-01
Switching off the service interval display
– Press and hold the left button.
The value decreases rapidly until off appears in the display.
7.2.5 Setting kilometers or miles
Info
If you change the unit of measure, the ODO value is retained and converted accordingly.
Condition
The motorcycle is stationary.
To Next Page
Loading...
