KTM Freeride E-SX - Removing the Headlight Mask with the Headlight (Freeride E-XC)

15 ELECTRICAL SYSTEM 89
Warning
Fire hazard The electrical system can be overloaded if the wrong fuses
are used.
– Use only fuses with the prescribed amperage. Never bypass or repair
fuses.
– Use spare fuses with the correct rating only.
Fuse (58011109110) ( p. 115)
Fuse (58011109120) ( p. 115)
Tip
Replace the spare fuse in the fuse box so that it is available if needed.
– Check that the power consumer is functioning properly.
– Close the fuse box cover and allow the catches to engage.
Finishing work
– Install the KTM PowerPack. ( p. 94)
– Lock the seat. ( p. 63)
15.5 Removing the headlight mask with the headlight (Freeride E‑XC)
Preparatory work
– Deactivate the vehicle. ( p. 37)
– Fold the seat up. ( p. 63)
– Remove the KTM PowerPack. ( p. 94)
– Mount the covering cap. ( p. 64)
C00811-10
Main work
– Switch off all power consumers.
–
Detach the brake line and wiring harness

.
–
Release rubber band

. Slide the headlight mask up and swing it forward.
C00812-10
–
Disconnect plug-in connectors of turn signals

, head light

, and ignition
lock

.