KTM Freeride E-SX - Chain Tension Checks

12 SERVICE WORK ON THE CHASSIS 64
12.23 Installing the spoiler
C00765-10
Main work
–
Position the spoiler and hook it in at area

.
C00764-11
–
Mount and tighten screw

.
–
Mount and tighten screw

.
C00763-11
–
Mount and tighten screws

.
– Repeat the operation on the opposite side.
Finishing work
– Install the KTM PowerPack. (
p. 94)
– Lock the seat. ( p. 63)
12.24 Mounting the covering cap
Note
Material damage Components damaged or destroyed by water or dirt.
– Mount the covering cap if you have removed the KTM PowerPack.
Preparatory work
– Deactivate the vehicle. ( p. 37)
– Fold the seat up. ( p. 63)
– Remove the KTM PowerPack. ( p. 94)
C00721-10
Main work
– Check the battery discharge plug form ring. ( p. 65)
–
Mount the covering cap

with one hand.