KUHN FC3160 TCD - Page 79

11. - Maintenance and storage
FC3160-3560-4060 TCD
79
KN284EGB_A
Mower conditioner
Universal joint assembly (b):
- Loosen screw (1).
- Pivot cover (2) to access greaser.
- Grease PTO shaft U-joint.
- Reinstall guard.
Intermediate PTO shaft 1(c):
- Loosen bolts (1).
- Pivot cover (2) to access greasers.
- Grease:
• Grease PTO shaft U-joint.
• Drive shaft tubes.
- Reinstall cover plate.
- Step on the self-adhesive non-slip patches (1) to
access the other greasers.
1
2
1
2
1
1