11. - Maintenance and storage
FC3160-3560-4060 TCD
85
KN284EGB_A
Mower conditioner
- Remove filler plug (1) and its washer.
- Place a container of sufficient capacity under
drain plug.
- Remove drain plug (2) and its washer.
- Allow oil to drain completely.
- Wait for dripping to stop.
- Clean and reinstall drain plug (2) and its
washer. (Replace if necessary).
- Pour the recommended oil quantity and quality
through the opening of fill/dipstick plug (1).
- Check angle gearbox oil level:
• The oil level must reach lower part of level plug
hole.
- Clean and reinstall filler plug (1) and its
washer (Replace if necessary).
The Gyrodine gearbox
- Before draining oil, operate the machine for a
few minutes so that the oil warms up.
To Next Page
Loading...
