11. - Maintenance and storage
FC3160TCD-3560TCD-4060TCD
95
KN284DGB B
Mower conditioner
Press knife upwards and pull it towards
yourself before releasing the special tool.
- (a), (b), (c)
Checking the full locking and free rotation of
the knife on the screw head.
- Check that screw head (2) is free to slide in spring
plate hole (3).
- Remove special tool.
- Rotate disk by half a turn.
- Repeat previous tasks.
- Repeat previous tasks on the other disks.
To Next Page
Loading...
