KUHN GMD310 - Storage and Disposal Procedures

10. - Maintenance and storage
GMD240 - 280 - 310
101
KN204BGB_G
Disc mower
10.3.7 Outer and inner cones
- Check torque of attachment bolts (1) of outer and
inner cone covers (2) and (3):
• Torque: 6 daNm (44 lbf ft).
Cover:
• (2): Outside.
• (3): Inside.
- Replace any lost or damaged cover.
10.4 Storage
10.4.1 At the end of each season
- Clean the machine thoroughly.
- Drain gearbox and cutterbar and refill with new oil.
- Grease the cylinder rods in contact with the
outside.
- Touch up any areas of damaged paintwork.
- Store machine with the cutter bar in horizontal
position in a sheltered dry place.
- Inspect and replace worn knives and bolts.
- Release belt tension.
1
2
3
1
A7300019 0