KUHN GMD310 - Coupling and Uncoupling; Description of Coupling Elements; Preparing the Tractor

GMD240 - 280 - 310
40
6. - Putting into service
KN204BGB_G
Disc mower
6.2 Coupling and uncoupling
The machine adapts to tractors fitted with a 3 point
linkage category 2.
6.2.1 Description of coupling elements
• A PTO shaft (1).
• A release cord (2).
• 1 hydraulic hose controlling the machine
transport/work position cylinder (3).
When the following equipment is fitted:
Mechanical safety release + Hydraulic pivot +
Lighting and signalling
• 2 hydraulic hoses to feed the mowing unit
pivot cylinder (4).
6.2.2 Preparing the tractor
Check that the tractor's authorized gross
weight as well as its lift capacity and
maximum weight per axle are not exceeded.
See section:
• Safety / Safety instructions / Precautions
when driving on public roads.
• Appendix.
The machine adapts to tractors fitted with a 3 point
linkage category 2.
The tractor must be fitted with lower link
stabilizers.
1
2
3
4
M1
abcd
T
1
T2
M2