GMD240 - 280 - 310
60
8. - Instructions for work
KN204BGB_G
Disc mower
8.4 Machine use
- Before mowing and to reduce risks of
projections, lower the front guard.
- Keep all persons and animals away from
the machine danger zone.
- Never lean or step on the protection cover.
At work, the hydraulic valve controlling the
transport/work positioning cylinder must
always be set in floating position in order to
allow a good ground adaptation.
Before the machine engages the crop:
From the working position:
- Engage the tractor PTO and gradually increase
speed until reaching a rated speed of 540 min-1.
To Next Page
Loading...
