GMD240 - 280 - 310
54
8. - Instructions for work
KN204BGB_G
Disc mower
8. Instructions for work
Before placing the machine in working
position:
- Check that nobody is within the machine
pivoting area.
- If there is someone, make sure the person
moves away.
8.1 Putting the machine into work
position
When the following equipment is fitted:
Mechanical safety release + Hydraulic pivot +
Lighting and signalling
- When switching into work position, the
cutter bar is lowered and must be fully
pivoted frontwards.
From the transport position:
- Fully lift tractor lift linkage.
- Activate single acting valve of transport/work
positioning cylinder to lighten pressure on
transport lock.
- Pull on the unlocking cord and maintain to keep the
transport lock open.
To Next Page
Loading...
