KUHN GMD310 - Remote Controlled Components; Safety Decals

4. - Safety
GMD240 - 280 - 310
21
KN204BGB_G
Disc mower
PTO type Diameter X splines A ±5 mm (0.20’’)
1 35 mm (1.378’’) 6 85 mm (3.35’’)
2 36 mm (1.42’’) 8 85 mm (3.35’’)
3 35 mm (1.378’’) 21 85 mm (3.35’’)
4 45 mm (1.772’’) 20 100 mm (4.00’’)
5 44 mm (1.732’’) 6 100 mm (4.00’’)
- When uncoupling the machine, rest the PTO shaft
on the support specially provided, and replace
protective shield on the PTO stub of the tractor.
- Read and follow the instructions in the operator's
manual provided with the PTO shaft.
4.3.2 Remote controlled components
- Danger of crushing and shearing can exist when
components are operated by hydraulic or
pneumatic controls. Keep away from these danger
zones.
4.3.3 Safety decals
Safety warning decals are placed in pictorial form on
various parts of the machine. They are there to warn
you of potential dangers and to tell you how to avoid
accidents.
- Always keep the safety decals clean and readable,
and replace them when they are worn, damaged,
missing or illegible.