GMD240 - 280 - 310
76
10. - Maintenance and storage
KN204BGB_G
Disc mower
The pictorials show the points to be greased.
- Clean grease nipples before greasing.
- Lubricate with multi-purpose grease grade
NLGI 2.
10.2.1 PTO shaft
- Place the machine in working position.
- Stop the tractor engine and remove ignition
key.
Before using the machine for the first time:
- Grease the transmission.
Primary PTO shaft
At the start of each season or every 100 hours:
• universal joints (1).
• transmission tube (2).
• Guide rings (3).
• Free wheel (4).
To Next Page
Loading...
