10. - Maintenance and storage
GMD240 - 280 - 310
75
KN204BGB_G
Disc mower
After the first 10
hours of use
Every 50 hours
Every 200 hours
or at the end of
the season
Lubrication
Grease
• The release sheath.
• The leg pin.
• The 3-point hitch frame
vertical pivot point.
Oil
- The moving parts and pivot
points.
Oil change
- The cutterbar.
- The angle gearbox.
10.2 Lubrication
- Before carrying out any maintenance or
repairs on the machine, switch off the
tractor engine, remove ignition key, wait
until all moving parts have come to a
standstill and apply park brake.
To Next Page
Loading...
