GMD240 - 280 - 310
82
10. - Maintenance and storage
KN204BGB_G
Disc mower
From the transport position:
- Remove filler plug (1) and its washer.
- Place a container of sufficient capacity under drain
plug (2).
- Remove drain plug (2) and its washer.
- Allow oil to drain completely.
- Wait for dripping to stop.
- Place the cutterbar in horizontal position.
- Pour the correct oil quantity and quality through the
opening of the filler plug (1):
• The oil level must reach the lower edge of the
emptying hole (2).
- Clean and reinstall drain plug (2) and its washer.
- Clean and reinstall filler plug (1) and its washer.
10.3 Maintenance
- Before carrying out any maintenance or
repairs on the machine, switch off the
tractor engine, remove ignition key, wait
until all moving parts have come to a
standstill and apply park brake.
To Next Page
Loading...
