10. - Maintenance and storage
GMD240 - 280 - 310
81
KN204BGB_G
Disc mower
Checking cutterbar oil level:
- The oil must reach the lower edge of the filling hole
(1).
- Clean and reinstall filler plug (1) and its washer.
Replace if necessary.
The angle gearbox
- Before draining oil, operate the machine for a
few minutes so that the oil warms up.
GMD240 GMD280 GMD310
Oil volume 0.45-L(0.12 US gal)
Type of oil Gear oil
When draining and refilling, it is recommended to use a synthetic base oil,
type PAO (Poly-Alpha-Olefins) with a viscosity grade equivalent to SAE
80W90.
Viscosity 80W90
Specification API - GL5 (extreme pressure)
To Next Page
Loading...
