GMD240 - 280 - 310
80
10. - Maintenance and storage
KN204BGB_G
Disc mower
GMD240 GMD280 GMD310
Oil volume 2-L(0.53 US gal) 2.25-L(0.59 US gal)
Type of oil Gear oil
When draining and refilling, it is recommended to use a synthetic base oil,
type PAO (Poly-Alpha-Olefins) with a viscosity grade equivalent to SAE
80W90.
Viscosity 80W90
Specification API - GL5 (extreme pressure)
- Never use an oil of viscosity SAE 90 in the
cutterbar.
From the transport position:
- Place a container of sufficient capacity under drain
plug (2).
- Remove filler plug (1) and its washer.
- Unscrew drain plug (2) and its seal.
- Allow oil to drain completely.
- Wait for dripping to stop.
- Clean and reinstall drain plug (2) and its washer.
Replace if necessary.
- Pour the correct oil quantity and quality through the
opening of the filler plug (1).
To Next Page
Loading...
