8-36
Setup and Registration (System Menu) > System Menu
Document Box
[Home] key > [...] > [System Menu] > [Function Settings] > [Document Box]
Job Box
[Home] key > [...] > [System Menu] > [Function Settings] > [Job Box]
Subaddress Box Box
[Home] key > [...] > [System Menu] > [Function Settings] > [Subaddress Box Box]
Registers a fax box to be received by Subaddress Box communication.
FAX Operation Guide
Fax Memory RX Box
[Home] key > [...] > [System Menu] > [Function Settings] > [Fax Memory RX Box]
Set whether to perform print immediately for the FAX documents received or to save them in the Fax Memory RX
Box.
FAX Operation Guide
Item Description
Custom Box - Add/Edit
Creating a New Custom Box (page 5-50)
Auto File Deletion Time
Set the time to automatically delete stored documents.
Quick Setup Registration
(Storing in Box)
Quick Setup Registration (Storing in Box) (page 8-10)
Quick Setup Registration
(Box Print)
Quick Setup Registration (Box Print) (page 8-10)
Quick Setup Registration
(Sending from Box)
Quick Setup Registration (Sending from Box) (page 8-10)
Item Description
Quick Copy Job
Retention
To maintain free space on the hard disk, you can set the maximum number of stored jobs.
Value: number between 0 and 300
When 0 is set, Quick Copy cannot be used.
Deletion of Job
Retention
This setting specifies that documents, such as Private Printing, Quick Copying, or Proof and Hold
Printing, saved temporarily in the job box are automatically deleted after they have been saved
for a set time.
Value: Off, 1 hour, 4 hours, 1 day, 1 week
This function is valid for documents saved after the function is set. Regardless of this function
setting, temporary documents are deleted when the power switch is turned off.
Deletion of PIN Print
at Power Off
Configures whether to delete the jobs retained in the PIN Print box when the power is turned
off.
Value: Off, On
To Next Page
Loading...
Need help?
General