Kyocera ECOSYS MA6000ifx User Manual

8-51
Setup and Registration (System Menu) > System Menu
IPSec
[Home] key > [...] > [System Menu] > [Network Settings] > "Network Settings" [IPSec]
Restart Network
[Home] key > [...] > [System Menu] > [Network Settings] > "Network Settings" [Restart Network]
Optional Network
[Home] key > [...] > [System Menu] > [Network Settings] > "Optional Network"
Configure settings for the optional Network Interface Kit.
Host Name
Wireless Network
Configure settings for the optional Wireless Network Interface Kit.
Item Description
IPSec
Select whether to use IPSec.
Value: Off, On
Item Description
Restart Network
Restarts the network.
NOTE
This menu is displayed when the optional Network Interface Kit or Wireless Network Interface Kit is installed.
Item Description
Host Name
Check the host name of the machine. Host name can be changed from Command Center
RX.
Changing Device Information (page 2-74)
NOTE
This function is displayed when the Wireless Network Interface Kit (IB-51) is installed.
Item Description
Connection Status
You can check the wireless LAN status.
Setup Available Network
Select access points to which the machine can be connected, enter the
Preshared Key and start a connection.
Push Button Method
If the access point supports the push button method, wireless settings can
be configured using the push button. This setting executes push button,
and the connection is started by pressing the push button on the access
point.
NOTE
The push button method supports only the WPS.
PIN Code Method
(Device)
Starts connection using the machine's PIN code. Enter the PIN code into the
access point. The PIN code of the machine is automatically generated.
PIN Code Method
(Terminal)
Starts connection using the PIN code of the access point. Enter the PIN code
of the access point.

Kyocera ECOSYS MA6000ifx Specifications

General

Brand	Kyocera
Model	ECOSYS MA6000ifx
Category	Printer
Language	English