9-27
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Simple Login Setup
Register users to use simple login. You can add up to 20 users.
1
Display the screen.
1 [Home] key > [...] > [System Menu] > [Job Accounting/Authentication]
2 Select " User Login Setting" [Simple Login Key].
2
Enter the user information.
1 Select the key to which you want to register a user.
2 Enter the user name to be displayed.
3 Select [Select user].
4 To specify the user from local users, select [Local User]. To specify from network users, select [Network
User].
The procedure differs depending on the transmission method selected.
Specifying the user from local users
Select the user to be set for simple login.
If the User Authentication screen appears, log in with a user who has the privilege to configure this
setting. If you do not know your login User Name or Password, please contact your Administrator.
For details on entering characters, refer to the following:
Character Entry Method (page 11-10)
• Search by login user name or name. Select either [Search (Login)] or [Search (Name)] to switch
between [Search (Login)] and [Search (Name)].
• Select [User Name] or [Login User Name] to sort the user list.
To Next Page
Loading...
