10-31
Troubleshooting > Troubleshooting
R
S
Message Checkpoints Corrective Actions
Reference
Page
Regulating the
temperature…
― The machine is under the
adjustment to maintain its
quality. Please wait.
―
Remove originals in
the document
processor.
Are there any originals left in the
document processor?
Remove originals from the
document processor.
―
Replace all originals
and press [Continue].
— Remove originals from the
document processor, put them
back in their original order, and
place them again. Select
[Continue] to resume printing.
Select [Cancel] to cancel the
job.
—
Running security
function...
— Running security function.
Please wait.
—
Message Checkpoints Corrective Actions
Reference
Page
Scanner memory is
full.
*1
— Scanning cannot be performed
due to insufficient memory of the
scanner. Follow the instructions
on the screen.
—
Scheduled sending
jobs exceeded.
— The number of jobs has
exceeded the limit set for
delayed transmission. Select
[End]. The job is canceled.
Wait until the delayed
transmission is executed, or
cancel the delayed transmission
and then perform the job again.
—
Select another
cassette.
Is the cassette you selected
correct?
The specified cassette is a fax
special stage.
Select another valid cassette.
Select [Continue] to print.
—
Send Error.
*1
— An error has occurred during
transmission. The job is
canceled. Select [End]. Refer to
Responding to Send Error for
the error code and corrective
actions.
page 10-36
Skewed originals or
multi originals fed at
once.
— See the caution attached on the
document processor and check
the originals. If the originals are
jammed, follow the instructions
on the screen to remove the
originals.
page 10-44
To Next Page
Loading...
Need help?
General