10-32
Troubleshooting > Troubleshooting
T
SSD error. — An error has occurred on the
SSD. Job is canceled. Select
[End].
The error cords are as follows.
01: The amount of data that can
be saved at once has been
exceeded. Restart the system or
turn the power OFF/ON. If the
error still occurs, divide the file
into smaller files. If the error
occurs after the file is divided,
the SSD is damaged. Execute
[System Initialization].
04: Insufficient space on the
SSD to complete this operation.
Move data or delete unneeded
data.
Please be aware that when you
carry out initialization of the
system, the data saved in SSD
will be erased.
—
Subaddress box limit
exceeded.
— Follow the instructions on the
screen and delete documents
from the Subaddress to make
room for FAX reception.
To check the canceled job,
select the [Status/Job Cancel]
key and then [Printing Jobs] to
check receipt result.
FAX
Operation
Guide
System error. — System error has occurred.
Follow the instructions on the
screen.
—
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time
elapses.
Auto Error Clear (page 8-20)
Message Checkpoints Corrective Actions
Reference
Page
The cover is open. Is there any cover which is
open?
Close the cover indicated on the
screen.
―
The device cannot be
connected because
allowed connections
would be exceeded.
Are ten handheld devices
connected simultaneously?
Cancel a connection to a
portable device that is not being
used, or set the machine's auto
disconnect time to break
portable device connections.
page 8-40
Message Checkpoints Corrective Actions
Reference
Page
To Next Page
Loading...
Need help?
General