2-37
Installing and Setting up the Machine > Network Setup
IPv4 setting
1
Display the screen.
[Home] key > [...] > [System Menu] > "Network Settings" [Wired Network Settings] > "TCP/IP Setting"
[IPv4 Settings]
2
Configure the settings.
When using DHCP server
[DHCP]: Set to [On].
When setting the static IP address
[DHCP]: Set to [Off].
[IP Address]: Enter the address.
[Subnet Mask]: Enter the subnet mask in decimal representation (0 to 255).
[Default Gateway]: Enter the address.
When using the Auto-IP, enter "0.0.0.0" in [IP Address].
When setting the DNS server
In the following cases, set the IP address of DNS (Domain Name System) server.
- When using
the host name with [DHCP] setting set to [Off].
- When using
the DNS server with IP address that is not assigned by DHCP automatically.
Select [Use DNS Server from DHCP] or [Use following DNS Server]. When [Use following DNS Server] is
selected, you can enter static DNS server information in the Primary and Secondary fields provided.
If the User Authentication screen appears, log in with a user who has the privilege to configure this setting. If
you do not know your login User Name or Password, please contact your Administrator.
After changing the setting, restart the network from System Menu, or turn the machine OFF and
then ON.
Restart Network (page 8-51)
Ask your network administrator for the IP address in advance, and have it ready when you configure this
setting.
To Next Page
Loading...
Need help?
General