EasyManua.ls Logo

Kyocera ECOSYS P4060DN - Check the USB Memory Information; Removing USB Memory

Kyocera ECOSYS P4060DN
443 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-27
Operation on the Machine > Operating using Removable USB Memory
2
Print the document.
1 Select the folder containing the file to be printed > [Open].
The machine will display documents in the top 3 folder levels, including the root folder.
2 Select the file to be printed > [Print]
3 Change the number of copies, duplex printing, etc. as desired.
For the features that can be selected, refer to the following:
4 Press the
[Start] key.
Printing of the selected file begins.
Check the USB Memory Information
1
In the removable memory screen, select [Memory Information].
2
Once you confirm the information, select [Close].
Removing USB Memory
1
Display the screen.
[Home] key > [Remove Memory]
2
Select [Remove Memory].
Select [OK], and remove the USB memory after "Removable Memory can be safely removed."
is displayed.
NOTE
1,000 documents can be displayed.
To return to a higher level folder, select [Up].
Removable Memory (page 6-4)
IMPORTANT
Be sure to follow the proper procedure to avoid damaging the data or USB memory.
USB memory can also be removed after checking the status of the device.
Device/Communication (page 7-11)

Table of Contents

Other manuals for Kyocera ECOSYS P4060DN

Related product manuals