Kyocera ECOSYS P4060DN - Connecting the Machine and Other Devices

2-6
Installing and Setting up the Machine > Connecting the Machine and Other Devices
Connecting the Machine and Other Devices
Prepare the cables necessary to suit the environment and purpose of the machine use.
When Connecting the Machine to the PC via USB
When Connecting the Machine to the PC on the Network
Cables that Can Be Used
NOTE
If you are using wireless LAN, refer to the following.
Configuring the Wireless Network (page 2-27)
Connection Environment Function Necessary Cable
Connect a LAN cable to the
machine.
Printer LAN cable (10BASE-T, 100BASE-TX,
1000BASE-T)
Connect a USB cable to the
machine.
Printer USB2.0 compatible cable (Hi-Speed USB
compliant, Max. 5.0 m)
IMPORTANT
Using a cable other than a USB 2.0 compatible cable may cause failure.
USB
Network
Network cable
connection
Wi-Fi connection
*1
Wi-Fi Direct
connection
*1
Wi-Fi access point
Tablet
*1 Only for models with Wi-Fi.