Kyocera ECOSYS P4060DN - Replacing Staples (1,000-Sheet Finisher)

10-7
Troubleshooting > Regular Maintenance
Replacing Staples (1,000-Sheet Finisher)
When the Staple Unit runs out of staples, the following messages will be displayed. The staple cartridge holder need to
be replenished with staples.
"Staple is empty."
1
Open the finisher front cover.
2
Remove the Staple Cartridge Holder.
3
Replace the staples.
NOTE
If the Staple Unit runs out of staples, contact your dealer or service representative.
1
1
2