Kyocera ECOSYS P4060DN - Display of Keys that Cannot be Set

2-18
Installing and Setting up the Machine > Touch Panel
Display of Keys That Cannot Be Set
Keys of features that cannot be used due to feature combination restrictions or non-installation of options are in a non-
selectable state.
Normal Grayed out Hidden
In the following cases, the key is
grayed out and cannot be selected.
• Cannot be used in combination
with a feature that is already
selected.
• Use prohibited by user control.
•[Preview] has been selected.
Cannot be used because an option
is not installed.
NOTE
If a key that you wish to use is grayed out, the settings of the previous user may still be in effect. In this case, select
the [Reset] key and try again.
If the key is still grayed out after the [Reset] key is selected, it is possible that you are prohibited from using the
function by user control. Check with the administrator of the machine.
Staple
/Punch
OffOff
Combine
Staple
/Punch
OffOff
Combine
Staple
/Punch
OffOff
Combine