9-34
User Authentication and Accounting (User Login, Job Accounting) > Apply Limit
Apply Limit
This specifies how the machine behaves when the counter has reached the limit of restriction. The table below
describes the action taken.
1
Display the screen.
1 [System Menu/Counter] key > [User Login/Job Accounting] > "Job Accounting
Settings" [Next]
2 Select "Apply Limit" [Change].
2
Configure the settings.
Select [Immediately], [Subsequently], or [Alert Only] > [OK]
Item Descriptions
Immediately
*1
*1 If printing using the Job Box, the next job is prohibited when the counter reaches its limit.
Storing in the Job Box or Custom Box is not prohibited.
Job stops when the counter reaches its limit.
Subsequently Printing of the job continues but the subsequent job will be
rejected.
Alert Only Job continues while displaying an alert message.
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Login User Name: 6000
Login Password: 6000
To Next Page
Loading...
