Kyocera ECOSYS P4060DN - Page 230

8-11
Setup and Registration (System Menu) > System Menu
Show Paper Setup
Message
Set whether to display the confirmation screen for the paper setting when a new
paper is set for each cassette.
Value: Off, On
NOTE
[Cassette 3] to [Cassette 5] are displayed when the following optional paper feeder
is installed.
[Cassette 3]: When a paper feeder (500-sheet×2) or large capacity paper feeder
(1,500-sheet×2) is installed.
[Cassette 4]: When a paper feeder (500-sheet×2) or large capacity paper feeder
(1,500-sheet×2) is installed.
[Cassette 5]: When a side feeder (3,000-sheet) is installed.
Cassette 1 to 5
Multipurpose Tray
Paper Source for Cover Select the paper source in which the cover paper used for the Cover function is
placed.
Value: Cassette 1 (to 5), Multipurpose Tray
NOTE
[Cassette 3] to [Cassette 5] are displayed when the following optional paper feeder
is installed.
[Cassette 3]: When a paper feeder (500-sheet×2) or large capacity paper feeder
(1,500-sheet×2) is installed.
[Cassette 4]: When a paper feeder (500-sheet×2) or large capacity paper feeder
(1,500-sheet×2) is installed.
[Cassette 5]: When a side feeder (3,000-sheet) is installed.
Special Paper Action When printing on Prepunched, Preprint, and Letterhead, the punch-holes might not
be aligned or the print direction might be upside-down depending on the direction of
the document and the combination of print functions. In such a case, select [Adjust
Print Direction] to adjust the print direction. When paper orientation is not important,
select [Speed Priority].
If [Adjust Print Direction] is selected, load paper according to the steps below.
Example: printing on Letterhead
Value: Adjust Print Direction, Speed Priority
Item Description
Multipurpose TrayCassetteFinishedPaperOriginal
Multipurpose TrayCassetteFinishedPaperOriginal