8-25
Setup and Registration (System Menu) > System Menu
Resolution Set the resolution used for printing.
Value: 600 dpi, 1200 dpi
Settings that are received from the printer driver have priority over the operation
panel settings.
KIR Select the default KIR (smoothing) setting.
Value: Off, On
Printing Job Terminator You can select the condition which regarded as a job termination if the print job could
not be processed until the end due to your environment and the other reason.
Value
EOJ (End of Job): The command recognized as a termination of the job data is
regarded as one job until it is detected.
End of Network Session: The data included in a network session at network
connection is regarded as one job.
UEL (Universal Exit Language): The UEL included in the termination of the job
data is regarded as one job until it is detected.
Item Description
To Next Page
Loading...
