8-28
Setup and Registration (System Menu) > System Menu
Device Log History Settings
[System Menu/Counter] key > [Report] > [Device Log History Settings]
Destination
Set the destination to which login histories are sent. E-mail address only can be set as
destination.
This function is displayed when "Login History" is set to [On].
Subject Set the subject automatically entered when sending login histories by E-mail.
Value: Up to 60 characters
This function is displayed when "Login History" is set to [On].
Log Reset Resets the recorded login histories.
If the user authentication screen appears, enter your login user name and login password and select [Login]. For this,
you need to login with administrator privileges. The factory default login user name and login password are set as
shown below.
Login User Name: 6000
Login Password: 6000
Item Description
Device Log History Select whether to record the device log history.
Value: Off, On
If [On] is selected, set the number of histories to be stored. The setting range is 1 to
1,000.
Auto Sending Select whether the device log history is automatically sent to the set address when
the number of entries reaches the number set in "Device Log History".
Value: Off, On
This function is displayed when "Device Log History" is set to [On].
Destination Set the destination to which device log histories are sent. E-mail address only can be
set as destination.
This function is displayed when "Device Log History" is set to [On].
Subject Set the subject automatically entered when sending device log histories by E-mail.
Value: Up to 60 characters
This function is displayed when "Device Log History" is set to [On].
Item Description
To Next Page
Loading...
