Kyocera ECOSYS P4060DN - Page 256

8-37
Setup and Registration (System Menu) > System Menu
LAN Interface
Bonjour
[System Menu/Counter] key > [System/Network] > [Network] > [Bonjour]
IPSec
[System Menu/Counter] key > [System/Network] > [Network] > [IPSec]
Protocol Settings
[System Menu/Counter] key > [System/Network] > [Network] > [Protocol Settings]
Configure protocol settings.
Item Description
LAN Interface Specify the settings for the LAN interface to be used.
Value:
Auto, 10BASE-T Half, 10BASE-T Full, 100BASE-TX Half, 100BASE-TX Full,
1000BASE-T
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Item Description
Bonjour Select whether to use Bonjour.
Value: Off, On
Wi-Fi Direct Set whether to enable this function for each network.
Value: Disable, Enable
Wi-Fi
Wired Network
Item Description
IPSec Select whether to use IPSec.
Value: Off, On
Item Description
SMTP (E-mail TX) Select whether to send E-mail using SMTP.
Value: Off, On
POP3 (E-mail RX) Select whether to receive E-mail using POP3.
Value: Off, On