9-16
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
3 "Display Name" [Change] > Enter the user name to be displayed > [OK]
4 Select "User" [Change].
5 To specify the user from local users, select [Local User]. To specify from network users,
select [Network User].
The procedure differs depending on the transmission method selected.
Specifying the user from local users
Select the user to be set for simple login.
Specifying the user from network users
Select [Login User Name] and [Login Password], enter the information of the user to be
registered, and select [OK].
If you are specifying a user for whom a domain is set in network authentication, select the
"Domain" and select the domain where the user is registered.
6 "Password Login" [Change] > [On] or [Off] > [OK] > "Icon" [Change]
7 Select the user icon to be displayed and select [OK].
3
Register the user.
Select [Save].
For details on entering characters, refer to the following:
Character Entry Method (page 11-9)
For details on entering characters, refer to the following:
Character Entry Method (page 11-9)
Domain:
OK
# Keys
Simple Login Key: s - User
Enter login user name and password.
Cancel Back
Login
User Name
Login
Password
# Keys
Domain 1
**********
0099
m0310502_01
To Next Page
Loading...
