2K3/2L3
1-3-37
U099 Setting: [B/W Level1]
1. Select an item to be set.
2. Change the setting value using the cursor left/right keys or numeric keys.l
*: When DP is installed.
3. Press the start key. The value is set.
Completion
Press the stop key. The screen for maintenance item No. is displayed.
U100 Setting the main high voltage
Description
Performs main charging.
Purpose
To check main charging.
Method
1. Press the start key.
2. Select [Main Charger].
3. Press the start key.
Turning the main charger on.
4. To stop operation, press the stop key.
Completion
Press the stop key when main charger output stops. The screen for selecting a maintenance item
No. is displayed.
Item No. Description
Display Description
Setting
range
Initial
setting
Original R1 - 3 Original threshold value for color R 0 to 255 40/30/20 50/50/50*
Original G1 - 3 Original threshold value for color G 0 to 255 40/30/20 50/50/50*
Original B1 - 3 Original threshold value for color B 0 to 255 40/30/20 50/50/50*
Light Source R Light source threshold value for
color R
0 to 255 19 49*
Light Source G Light source threshold value for
color G
0 to 255 19 49*
Light Source B Light source threshold value for
color B
0 to 255 19 49*
Wait Time Time from activation of the original
detection switch (ODSW) to origi-
nal size judgment
0 to 255 150 150*
To Next Page
Loading...
