2GZ/2G1-2
1-3-14
U237
Setting finisher stack quantity
Description
Sets the number of sheets of each stack on the main tray and on the internal tray in the optional finisher.
Purpose
To change the setting when a stack malfunction has occurred.
Method
1. Enter the maintenance mode and press the cursor up/down keys to display [U237].
2. Press the cursor right key to display the submenu screen.
3. Press the cursor up/down keys to select the item for which the preset value is to be changed.
4. Press the OK key. [ ? ] will blink.
5. Press the cursor up/down keys to change the setting.
6. Press the OK key. The value is set.
To keep the setting, press the CANCEL key.
7. Turn the main switch off and on.
Maintenance
item No.
Description
>Adjust Finish.>
[U237]Limit
Submenu display Description Setting
range
Initial
setting
>>Main Tray
Number of sheets of stack on the main tray
3000/1500 3000
>>Middle Tray
Number of sheets of stack on the internal tray
for sort or staple printing
50/30 50
>>Main Tray
[237.1] ? 3000
To Next Page
Loading...
