2GZ/2G1-2
1-3-28
Service items Description
No. Items Description
20 Paper source position counter
/Duplex/
21 Life counter of each unit /Drum unit/Developer unit/Fuser unit/
22 Document finisher counter /Document finisher total/Main tray total/Centerfold unit/Punch unit/Sta-
pler/
23 Version of each unit /3000-sheet paper feeder/Document finisher (software)/Mailbox/Center-
fold unit/Internal tray (3000-sheet document finisher)
24 Drum ID -
25 Serial interface information RS2: RS-232C
RS4: RS-422A
26 Drum sensitivity information -
27 Optional paper feeder/stacker
information
[First 2 bytes - Second 2 bytes]
First 2 bytes
bit0: MP tray
bit1 to 4: Cassette 1 to 4
bit5 to 6: Reserved
bit7: Duplex
bit8: 3000-sheet paper feeder
bit9: Reserved
bit10: Paper feeder
bit11 to 15: Reserved
Second 2 bytes
bit0: Face up
bit1: Face down
bit2: Reserved
bit3: Mailbox
bit4: Document finisher
bit5 to 15: Reserved
28 Operation panel message lan-
guage
PMSG command setting (decimal)
29 Current temperature
0 to 100 °C/32 to 212 °F (in 1 °C/1.8 °F increment, “-” = Temperature/
humidity sensor is abnormal.)
30 Current humidity 0 to 100% RH (in 1% increment)
31 Number of rebooting for verti-
cal distortion check
-
32 MAC address -
33 Fixed asset number (maximum 16 characters)
34 Media type attributes Media type setting value from 1 to 28 (paper weight)
(unused media type (18 to 20) are always 0x00.)
35 Memory SPD information (slot
1)
2 to 6 bytes, 8 to 36 bytes, 94 to 95 bytes (total 32 bytes)
36 Toner container information -
37 Parameters of maintenance
mode
-
38 Drum serial number -
39 Machine serial number -
NOTE:
Code conversion
ABCDEFGH I J
0123456789
To Next Page
Loading...
Need help?
General
Weight and Dimensions
