2KW/2KX
1-4-5
4211 Eject sensor does not turn
OFF
The eject sensor (ES) does not turn off during
paper feed from cassette.
D
4212 The eject sensor (ES) does not turn off during
paper feed from paper feeder 1.
D
4213 The eject sensor (ES) does not turn off during
paper feed from paper feeder 2.
D
4218 The eject sensor (ES) does not turn off during
paper feed from duplex section.
D
4219 The eject sensor (ES) does not turn off during
paper feed from MP tray.
D
4220 Eject sensor is turned ON The eject sensor (ES) is turned on when the power
is turned on.
D
9010 DP top cover open The DP top cover is opened during original feed-
ing.
The DP timing sensor (DPTS) turns on when start-
ing the original paper feed.
H
9400 No original feed The DP timing sensor (DPTS) does not turn on
within specified time during the first sheet feeding
(Retry 5 times).
H
The DP timing sensor (DPTS) does not turn on
within specified time during the second sheet feed-
ing (Retry 5 times).
H
9401 An original jam in the original
switchback section 2
During original switchback operation, DP timing
sensor (DPTS) does not turn off within specified
time of the DP paper feed motor (DPPFM) turning
on.
H
9410 An original jam in the original
conveying section
The DP timing sensor (DPTS) does not turn off
within specified time of the DP paper feed motor
(DPPFM) turning on.
H
9411 An original jam in the original
switchback section 1
The DP timing sensor (DPTS) does not turn on
within specified time of the DP paper feed motor
(DPPFM) turning off.
H
Code Contents Conditions
Jam
location*
*: Refer to figure 1-4-2 for paper jam location (see page 1-4-2).
To Next Page
Loading...
