Kyocera FS-C2026MFP

2KW/2KX
1-4-42
1-4-6 Send error code
(1) Scan to SMB error codes
Code Display Causes Check procedures/corrective measures
1101
Host name error
Enter the disable host
name of SMB server.
Enter the correct host name in COMMAND
CENTER.
1102 User/Password or
Folder/Shared name
error
Domain name is not
entered.
Enter the user name with the form of either
[Domain¥User], [Domain/User] or
[Domain@User].
Assign disable user/pass-
word.
Enter the correct user name/password.
Assign disable folder/
shared name.
Enter the correct folder/shared name.
Assign the user who is not
allowed to access to folder.
Check the access limit of destination folder.
Host name error. Check if the prohibited letters are used to
shared name.
` ~ ! @ # $ ^ & * ( ) = + [ ] { } \ | ; : ' " < > / ?
1103 Folder path or File
name error
Domain name is not enter Enter the user name with the form of either
[Domain¥User], [Domain/User] or
[Domain@User].
Assign disable folder path. Enter correct folder path.
Assign the user who is not
allowed to access to folder.
Check the access limit of destination folder.
1105 Protocol error SMB protocol is set to
OFF.
Enable SMB protocol in COMMAND CEN-
TER.
2101 Server connect error Enter the disable host
name/IP address.
Enter the correct host name or IP address.
Assign the wrong port
number.
Enter the correct port number.
Network is not connected. Check if the server is operating properly.
Check the network connection (cable. net-
work condition within LAN, etc.).
2201 Network transfer error Error occurs on the net-
work.
Check the network connection (cable. net-
work condition within LAN, etc.).
2203 Response wait with
timeout error
Response is not returned
from the server above
specified time.
Check the network connection (cable. net-
work condition within LAN, etc.).
9181 Page max count over
error
The number of pages of a
send file exceeded 999
pages.
Set the number of pages as 999 or less.