EasyManua.ls Logo

Kyocera FS-C2026MFP

Kyocera FS-C2026MFP
304 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2KW/2KX
1-4-43
(2) Scan to FTP error codes
Code Contents Causes Check procedures/corrective measures
1101
Host name error
Enter the disable host
name of FTP server.
Enter the correct host name in COMMAND
CENTER.
1102 User/Password error Domain name is not
entered.
Enter the user name with the form of either
[Domain„User] or [Domain/User].
Assign disable user/pass-
word.
Enter the correct user name/password.
1103 Folder path or File
name error
Connect to the folder
which is not permitted for
reference/writing.
Enter correct user name/password.
Check the access limit of destination folder.
Assign disable folder path. Enter correct folder path.
1105 Protocol error FTP protocol is set to OFF. Enable FTP protocol in COMMAND CEN-
TER
2101 Server connect error Enter the disable host
name/IP address.
Enter the correct host name or IP address.
Assign the wrong port
number.
Enter the correct port number.
Network is not connected. Check if the server is operating properly.
Check the network connection (cable. net-
work condition within LAN, etc.).
2102 Connect with time-
out error
The server is unable to
communicate.
Check if the server is operating properly.
Send the server which
does not support FTP
server.
Enter the correct host name or IP address.
2103 Response wait with
timeout error
The server is unable to
communicate.
Check if the server is operating properly.
2201 Network transfer error Error occurs on the net-
work.
Check the network connection (cable. net-
work condition within LAN, etc.).
2202 Network transfer with
timeout error
Error occurs on the net-
work.
Check the network connection (cable. net-
work condition within LAN, etc.).
2203 Response wait with
timeout error
Response is not returned
from the server above
specified time.
Check the network connection (cable. net-
work condition within LAN, etc.).
3101 Server response error The server is error status. Check if the server is working properly.
9181 Page max count over
error
The number of pages of a
send file exceeded 999
pages.
Set the number of pages as 999 or less.

Table of Contents

Other manuals for Kyocera FS-C2026MFP

Related product manuals