2KW/2KX-1
1-1-2
Light source Exposure lamp
Scanning system Flat bed scanning by CCD image sensor
Photoconductor OPC drum (diameter 30 mm)
Image write system Semiconductor laser
Charging system Charger roller
Developing system
Touch down developing system
Developer: 2-component
Toner replenishing: Automatic from the toner container
Transfer system
Primary: Transfer belt
Secondary: Transfer roller
Separation system Small diameter separation
Cleaning system Drum: Counter blade
Charge erasing system Exposure by cleaning lamp (LED)
Fusing system
Heat and pressure fusing with the heat roller and the press roller
Heat source: halogen heater
Abnormally high temperature protection devices: thermostat
CPU PowerPC464 (667MHz)
Main
memory
Standard 768 MB
Maximum 1792 MB
Interface
Standard
USB interface connector: 1 (USB Hi-speed)
USB host: 2
Network interface: 1 (10BASE-T/100BASE-TX)
Option
KUIO/W slot: 1
Resolution 600 × 600 dpi
Operating
environment
Temperature 0 to 32.5 °C/50 to 90.5 °F
Humidity 15 to 80% RH
Altitude 2,500 m/8,202 ft or less
Brightness 1,500 lux or less
Dimensions (W × D × H)
514 × 550 × 580 mm
20 1/4 × 21 5/8 × 22 13/16”
Weight 36.5 kg / 80.3 lb (with toner container)
Space required (W × D)
514 × 1020 mm (using MP tray)
20 1/4 × 40 3/16” (using MP tray)
Power source
120 V AC, 60 Hz, more than 8.9 A
220 - 240 V AC, 50/60 Hz, more than 4.7 A
Options Paper feeder × 2, Expanded memory
Item
Specifications
3 in 1 model (without FAX) 4 in 1 model (with FAX)
To Next Page
Loading...
