2KW/2KX
1-3-23
U600 Initializing all data
Description
Initializes software switches and all data in the backup data on the FAX control PWB, according
to the destination and OEM.
Executes the check of the file system, when abnormality of the file system is detected, initializes
the file system, communication past record and register setting contents.
Purpose
To initialize the FAX control PWB.
Method
1. Press the start key.
2. Select [Execute]. The screen for entering the destination code and OEM code is displayed.
3. Select [Country Code] and enter a destination code using the numeric keys (refer to the des-
tination code list on following for the destination code).
4. Press the start key.
There is no operation necessary on this screen.
The destination code and the OEM code are displayed with the values currently set.
5. Press the start key. Data initialization starts. To cancel data initialization, press the stop key.
6. After data initialization, the entered destination, OEM codes and ROM version are displayed.
A ROM version displays three kinds, application, boot, and IPL.
Destination code list
Item No. Description
Code Destination Code Destination
000 Japan 253 CTR21 (European nations)
009 Australia Italy
038 China Germany
080 Hong Kong Spain
084 Indonesia U.K.
088 Israel Netherlands
097 Korea Sweden
108 Malaysia France
126 New Zealand Austria
136 Peru Switzerland
137 Philippines Belgium
152 Middle East Denmark
156 Singapore Finland
159 South Africa Portugal
169 Thailand Ireland
181 U.S.A. Norway
242 South America 254 Taiwan
243 Saudi Arabia
To Next Page
Loading...
